PD362i Compact DMR Radio
Compact Commercial DMR Two-Way Digital Radio with LCD Display
The Hytera PD362i open-standard DMR radio delivers clear two-way voice and text in a small pocket-sized design. This is the ideal solution for small to medium-sized organizations looking for cost-efective and high-quality radio communications.
Functions
ERGONOMIC AND LIGHT WEIGHT
Tactile buttons for no-look PTT and emergency calling. Compact antenna makes the PD362i feel like a cellular phone. Pocket-size design that weighs less than 6 ounces
ANALOG OR DIGITAL OPERATION
Supports both analog and digital modes. Allows switching between the two operation modes for communication with analog radios
RELIABLE AND DURABLE
Compliant with MIL-STD-810-G for shock and vibration. IP54 rated for water and dust resistance
LONG-LIFE BATTERY
Powerful 2000mAh Lithium Ion batteries deliver up to 12 hours of operation in digital mode and 10 in analog mode
DMR signaling enables group call, private call, and all call transmitting with PTT ID. Supports DMR Tier II repeaters to extend coverage.
EMERGENCY MODE
Raise an alarm with top priority to a base station or to other radios with the pre-programmed emergency mode, identifying the ID of the person issuing the alarm.
HIGH QUALITY AUDIO
Audio equalizer adjusts low, mid, and high frequency gain
ANALOG AND DIGITAL AUTO DETECT
Detects the signal type and automatically switches between analog and digital mode
LED DISPLAY
LED display allows good visibility even under bright daylight. Two-line display for messaging with up to 64 characters
ANTI-INTERFERENCE
Digital encoding and error correcting reduces signal interference on the same frequency..
ROAMING
This feature enables the radio to switch between sites, ensuring seamless communication.
QUICK TEXT MESSAGES
One-touch sending of pre-programmed text messages. Up to 10 pre-programmed via CPS
PSEUDO TRUNK
This virtual trunking feature automatically uses whichever digital timeslot is free to improve call connectivity and frequency efficiency
UPGRADE FEATURES (Optional)
ENCRYPTION
For secure audio and data
PRIORITY INTERRUPT
Priority Interrupt allows dispatcher to interrupt existing calls with important emergency information
STUN/REVIVE
Enables dispatch and other users to disable/enable a radio if it is stolen, lost, or used maliciously
PD362i – Standard Accessories

BL2009

PS1030
Power adapter (Micro USB) for PD3 series enables hassle free charging via PC or laptop

BC29
Plastic belt clip securing the radio for safety and convenience, for use with PD362i wireless charger kit (POA113)

RO01
Nylon Wrist Strap
PD362i – Optional Accessories

CH20L05
Wireless lithium-ion battery charger for PD362i

POA129
PD362i contact-charge battery cover (compliant with CH10L24)

CH10L24
Desktop Charger for PD36Xi, micro USB port, dual pocket design, supporting battery and radio charge simultaneously (used with POA129) without adapter

CH10L20
Rapid-rate charger (without adapter) designed to charge lithium-ion batteries from the PD3i series

PS6001
Six-unit Switching Power adapter

PC69
Programming cable for portable radios in PD3i series
Technical Specifications
General
| Frequency Range | UHF: 400-440MHz UHF: 430-470MHz |
| Channel Capacity | 256 (16 zones with 16 channels per zone) |
| Zone Capacity | 16 Zones with 16 Channels per Zone |
| Channel Spacing | 25/12.5KHz |
| Operational Voltage | 3.7 V |
| Battery | 2000mAh (Li-Ion) |
| Battery Life (5/5/90) | 12 hours Digital, 10 hours Analog |
| Weight | 5.64oz (160g) |
| Dimensions (H x W x D) | 4 3/16” x 2 11/16” x 29/32” (106 x 55 x 23mm) |
| Frequency Stability | ± 0.5ppm |
| Antenna Impedance | 50Ω |
Receiver
| Digital Sensitivity | 0.22μV / BER 5% |
| Analog Sensitivity | 0.22µV (Typical) (12dB SINAD) 0.4µV (20dB SINAD) 0.22µV (12dB SINAD) |
| Adjacent Selectivity | TIA-603: 60dB @ 12.5kHz, 70dB @ 25kHz ETSI: 60dB @ 12.5kHz, 70dB @ 25kHz |
| Intermodulation | TIA-603: 70dB @ 12.5/25kHz ETSI: 65dB @ 12.5/25kHz |
| Spurious Response Rejection | TIA-603: 70dB @ 12.5/25kHz ETSI: 70dB @ 12.5/25kHz |
| Hum and Noise | 40dB @ 12.5kHz, 43db @ 20kHz, 45dB @ 25kHz |
| Rated Audio Power Output | 0.4W |
| Rated Audio Distortion | ≤3% |
| Audio Response | +1 to -3dB |
| Conducted Spurious Emission | <-57dBm |
Transmitter
| RF Power Output | UHF 1.5W – 3W |
| FM Modulation | 11K0F3E @ 12.5KHz 16K0F3E @ 25KHz |
| 4FSK Digital Modulation | 12.5 kHz (data only): 7K60FXD 12.5 kHz (voice & data): 7K60FXW |
| Conducted/Radiated Emission | -36 dBm 1 GHz |
| Modulation Limiting | ±2.5 kHz at 12.5 kHz ±5.0 kHz at 25 kHz |
| FM Hum and Noise | 40dB @ 12.5kHz, 45dB @ 25kHz |
| Adjacent Channel Power | 60dB @ 12.5kHz, 70dB @ 25kHz |
| Audio Response | +1 to -3dB |
| Audio Distortion | ≤3% |
| Digital Vocoder Type | AMBE+2TM |
| Digital Protocol | ETSI-TS102 361-1,-2,-3 |
Enviromental
| Operating Temperature | -22oF to +140oF (-30oC to +60oC) |
| Storage Temperature | -40oF to +185oF (-40oC to +85oC) |
| ESD | IEC 61000-4-2 (Level 4)±8kV Contact, ±15kV Air |
| Dust and Water Ingress | IP54 Standard |
| Humidity | Per MIL-STD-810 C/D/E/F/G Standard |
| Shock and Vibration | Per MIL-STD-810 C/D/E/F/G Standard |

DMR Tier II Conventional Repeaters
Increase coverage, expand capacity, and improve signal quality

DMR IP Site Connect
Connect Repeater Sites with IP Networks

SmartOne DMR Dispatch
Unified Communications and Dispatching

Hytera Bridge
PoC to DMR/Analog Radio Gateway
