VHF/UHF ANALOG & DIGITAL REPEATER

MULTI-MODE, SPACE SAVING SOLUTION
The Kenwood NXR-1000E series repeaters continue the line of migration friendly and forward thinking infrastructure to offer the ultimate in modern scalability and security for analog, NXDN™ and DMR two-way systems in a new and compact form-factor. Whether you are managing a single repeater, a wide area multi-site system or are managing multiple systems remotely, the NXR-1000E brings forward the same great digital two-way system capabilities while introducing the native ability to network analog and digital voice and data calls, enhanced secure remote programming, support for SSL certificates, SNMP monitoring, event and hardware logging, as well as tiered user management roles. For IT managers, this powerful repeater easily fits within modern organizational and technical requirements for support. For RF professionals the NXR-1000E is the perfect solution for an extensive range of customer needs.

.

  • VHF 136-174 50 – 1 W RF Output Power (Up to 50 W @ 50%, 25 W @ 100% Duty Cycle)
  • UHF 400-470 40-1W RF Output Power (up to 40W @ 50%, 25W @ 100% Duty Cycle)
  • UHF 450-520 40-1W RF Output Power (up to 40W @ 50%, 25W @ 100% Duty Cycle)
  • Light, Compact and Space-Efficient
  • 1.71-inch OLED with Icons and Numeric Displays
  • Thermal-Controlled Cooling Fan
  • Up to 32 Channels
  • Selectable Digital Protocol: DMR Tier II / NXDN Conventional2 (programmable one at a time) USB-A Connector for Audio Accessories External In/Out Pin from DB25 Non-repeat Simplex / Semi-Duplex Mode for Analog and NXDN Digital2
  • Hot Standby System Redundancy
  • Built-in IP Network Adapter
  • Unicast and Multicast Call Routing
  • SNMP protocol for network management
  • Supports G.711 Audio Codec (for Test console and Third-party Applications)
  • IP Remote Management (Monitor / Control / Programming / Test Console)
  • IPIF to External Applications (for IP Console, OTAP)
  • Built-in SIP IF (Digital Only)*1, *2
  • IP Remote Control Interface (IPRCI)
  • Enhanced Security (HTTPS)
  • CW ID
  • Multi-Site Conventional IP Network up to 16 Sites (for both Digital and Analog)2 IP Networking Compatible with NXR-5000 (NXDN)2, legacy KTI-3 (NXDN)2 and KTI-5 (DMR)2

NXR-1700/1800 SUPPLIED Accessories

  • DC Power Cable
  • Single Mounting Bracket
  • Dual Mounting Bracket
  • Rack Handles

SPECIFICATIONS

GENERAL NXR-1700E NXR-1800E NXR-1800E2
Frequency Range 136-174 MHz 450-520 MHz 400-470 MHz
Channel Capacity 32
Channel Spacing Analog 30* / 25 */ 15 / 12.5 kHz 25 / 12.5 kHz
Digital 12.5 / 6.25 kHz
PLL Channel Step 2.5 / 3.125 / 5 / 6.25 kHz 3.125 / 5 / 6.25 kHz
Power Supply 10.8 – 15.6 V DC
Current Drain Standby 0.6 A 0.7 A
Transmitting 12.0 A (Max. power), 9.0 A (25 W)
Operating Temperature -22ºF to +140ºF (-30ºC to +60ºC)
Frequency Stability +- 0.5 ppm
Antenna Impedance 50 Ohms
Dimensions (W x H x D) 8.21 x 1.73 x 8.33 in (208.5 x 44.0 x 211.5 mm)
Weight (net) *2 4.18 lb (1.9 kg)
FCC ID K44513100 K44513200 K44513201
ISED Certification 282F-513100 282F-513100
RECEIVER NXR-1700E NXR-1800E NXR-1800E2
Sensitivity DMR (5 % BER) 0.22 μV
DMR (1 % BER) 0.28 μV
NXDN 12.5 kHz (3% BER) 0.25 μV
NXDN 12.5 kHz (3% BER) 0.20 µV
Analog (12dB SINAD) 0.25 µV
Selectivity Analog @ 25 / 12.5kHz (TIA603) 83 / 77 dB
Analog @ 25 / 12.5kHz (TIA603E) 80 / 50 dB
FM Hum & Noise Analog @ 12.5 kHz 50 Db
Analog @ 25 kHz 55 Db
Intermodulation 80 dB
Spurious Rejection 90 dB
TRANSMITTER NXR-1700E NXR-1800E NXR-1800E2
RF Power Output 50 – 1 W (50 W @ 50% Duty, 25 W @ 100 % Duty) 40 – 1 W (40 W @ 50% Duty, 25 W @ 100 % Duty)
Spurious Emission -80 dB
FM Hum & Noise Analog @ 12.5 kHz 50 Db
Analog @ 25 kHz 55 Db
Audio Distortion 1%
Emission Designator 16K0F3E, 11K0F3E, 7K60FXD, 7K60F7D, 7K60FXE, 7K60F7E, 7K60FXW, 7K60F7W, 8K30F1E, 8K30F1D, 8K30F7W, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D
NXDN® is a registered trademark of JVCKENWOOD Corporation and Icom Inc. NEXEDGE® & FleetSync® are a registered trademarks of JVCKENWOOD Corporation. All other trademarks are the property of their respective holders.