HR1062 DMR Repeater
H-Series Professional DMR Digital 1U Repeater with Advanced Networking
The Hytera HR1062 H-Series DMR Repeaters are the next-generation in creative style and functionality that elevates the industry standard in professional two-way radios.
The HR1062 is the new state-of-the-art in digital radio communications, providing a more efficient experience with loud and clear audio, support for multiple types of radio and communications systems, and extended range.
The HR1062 features AC and DC auto-switching power, two simultaneous TDMA voice channels, high performance cooling, and all in a compact 1U form factor.The Hytera HM782 H-Series DMR mobile radios are the next-generation in creative style and functionality that elevates the industry standard in professional two-way radios. The HM782 is the new state-of-the-art in digital mobile radio communications, providing a more efficient experience with loud and clear audio, intuitive user interface, gateway functionality, and extended range. The HP782 features a 2.4″ TFD-LCD display and full keypad that support a wide variety of functions, GPS, and industry-leading audio performance. The HP782 H-Series mobile radios empower mobile and fleet employees with efficient and reliable communications.
Functions
COMPACT 1U FORM FACTOR
The 1U height is half that of conventional repeaters, and the HR1062 features a in-built power supply to save valuable rack space.
ANALOG & DIGITAL AUTO SWITCH
Mixed channel mode detects the receiving signal and automatically switches between analog and digital mode to provide a simple migration path.
WIDE COVERAGE
Enhanced Rx sensitivity extends communication range, and an Ethernet port provides access to IP networks to enable remote site connectivity.
HIGHER SECURITY
The HR1062 supports Digital End-to-End and Overthe-Air Encryption. This optional software-based encryption uses the secure and reliable ARC4 and AES encryption algorithms.
AC/DC AUTO SWITCH
The HR1062 supports AC/DC auto switching for locations with different power sources, power redundancy, and eliminates the cost and space required for power adapters.
RELIABLE OPERATION
The HM782 radios are designed for worker safety with an easy access emergency button, emergency calling, and priority interrupt. Lone Worker prompts the user to press a key at preset intervals to indicate they are safe. Large tactile knobs and piano-style buttons provide easy access that keep eyes on the road.
DMR – 2 TDMA 2 TIME SLOTS
TDMA digital technology provides 2 simultaneous voice channels that improves efficiency and doubles capacity without an extra frequency.
HR1062 – Standard Accessories
PWC03
AC POWER CORD
HR1062 – Optional Accessories
SM09D1
External speaker with clear voice output and adjustable bracket
SM10A1
Table microphone with large PTT and lockable monitor key
SM16A1
IP54 compliant portable microphone with 10-pin aviation connector to be used with mobile radios
SM16A2
Waterproof Palm Microphone (IP67) For use with repeater and mobile radios
PWC31
12AWG 2pin red/black power cord, 600V AWM UL1015, 3.165m (10.4 Ft)
PS22002
300W external power supply for mobile radios and repeaters
SEC1223
Power Supply Input 120VAC, Output 13.8VDC, 23 Amps
BRK12
Installation of up to two external power packs (PS22002) in a 19″ rack
PC37
Programming cable for mobile radios and repeater
PC47
Programming cable with toggle switch to use with mobile radios and repeaters
PC40
Programming cable with DB26 plug for mobile radios and repeater
PC110
HM782 to HR1062 back-to-back cable for analog to digital cross or UHF to VHF cross (audio & control lines), DB26 to DB26, length 60cm (23.6 in).
PC142
HM782 to HR1062 back-to-back cable for wireless link applications (data link), DB9/M to DB26/M, 1m
POA147
HM782 to HR1062 back-to-back cable, DB26 to DB26.
Technical Specifications
General
| Frequency Range | UHF 400-470MHz , VHF 136-174MHz |
| Channel Capacity | 64 Channels |
| Channel Spacing | 12.5kHz / 20kHz / 25kHz |
| Operational Voltage | DC: 13.6V ±15% AC: 100-120V |
| Current Consumption | DC: Standby ?0.9A, Transmitting ?12A AC: Standby ?0.35A, Transmitting ?1.2A |
| Weight | 17lb 10oz (8.0 kg) |
| Dimensions (HxWxD) | Standard 1U: 13/4” x 19” x 143/4” (44 x 483 x 366mm) |
| Frequency Stability | ± 0.5ppm |
| Antenna Impedance | 50Ω |
| Duty Cycle | 100% |
| Networking | Analog and Digital Conventional, DMR Tier II, IP Connect, and XPT Trunking |
Receiver
| Digital Sensitivity | 0.2?V (BER5 5%) 0.18?V (Typical)/BER 5% |
| Analog Sensitivity | 0.16μV (Typical) (12dB SINAD) 0.18μV (12dB SINAD) |
| Adjacent Selectivity | TIA-603: 65dB@12.5kHz, 75dB@20/25kHz ETSI: 60dB@12.5kHz, 70dB@20/25kHz |
| Spurious Response Rejection | TIA-603: 80dB@12.5/20/25kHz ETSI: 80dB@12.5/20/25kHz |
| Intermodulation | TIA-603: 75dB@12.5/20/25kHz ETSI: 70dB@12.5/20/25kHz |
| Blocking | 90dB |
| Hum and Noise | 40dB@12.5kHz, 43dB@20kHz, 45dB@25kHz |
| Rated Audio Distortion | ≤3% |
| Audio Response | +1 to -3dB |
| Conducted Spurious Emission | ≤1GHz: 1GHz: ≤-47dBm |
Transmitter
| RF Power Output | 5-50W adjustable |
| FM Modulation | 11K0F3E @ 12.5kHz 14K0F3E @ 20kKh 16K0F3E @ 25kHz |
| 4FSK Digital Modulation | 12.5kHz Data Only: 7K60FXD 12.5kHz Data and Voice: 7K60FXW |
| Conducted/Radiated Emission | Operating: ≤1GHz: -36dBm >1GHz: -30dBm Standby: ≤1GHz: -57dBm >1GHz: -47dBm |
| Modulation Limiting | ±2.5kHz @ 12.5kHz ±4.0kHz @ 20kHz ±5.0kHz @ 25kHz |
| FM Hum and Noise | 40dB @ 12.5kHz, 43dB @ 20kHz, 45dB @ 20/25kHz |
| Adjacent Channel Power | 60dB @ 12.5kHz, 70dB @ 20/25kHz |
| Audio Response | +1 to -3dB |
| Audio Distortion | ≤3% |
| Digital Vocoder Type | AMBE+2TM |
| Digital Protocol | ETSI-TS 102 361-1,-2,-3 |
Enviromental
| Operating Temperature | -22°F to +140°F (-30°C to +60°C) |
| Storage Temperature | -40°F to +185°F (-40°C to +85°C) |
Ordering Information
| HR1062-U1 | DMR Repeater UHF 400-470MHz, 5-50W, DMR Tier II & Analog Conventional Mode |
| HR1062-V1 | DMR Repeater VHF 136-174MHz, 5-50W DMr Tier ll & Analog Conventional Mode |
XPT Extended Pseudo Trunk
Single-site and Multi-site Extended Pseudo Trunking (XPT)
DMR IP Site Connect
Connect Repeater Sites with IP Networks
SmartOne DMR Dispatch
Unified Communications and Dispatching
Hytera Bridge
PoC to DMR/Analog Radio Gateway
DMR Tier II Conventional Repeaters
Increase coverage, expand capacity, and improve signal quality